Calibration Frequency
Frequency of Calibration
- Oxygen Probe: Every 6 Months (Replaced)
- Temperature Controller: Yearly (Outsourced)
- Rockwell Hardness Tester: Monthly (Outsourced) (In-house Daily On Standard Block)
- Brinell Hardness Tester: Every 6 Months (Outsourced) (In-house Daily On Standard Block)
- Furnace Validation: 9 Point Calibration Yearly (As per CQI-9 Standard)
- Vickers Hardness Tester: Yearly
- Microscope: Yearly
- Thermocouple: Hardening Furnace Tempering Furnace
- Quench Oil Testing: Every 6 Months
- System Accuracy Test: Quarterly As Per CQI9
- Washing Liquid: PH value & concentration checked daily
- Scada Data Back Up: 5 To 10 Years (Depending On Data File Size)
- Temperature Uniformity Survey: Yearly As per CQI9 & API6A
- CP Controller: Every 6 Months (Outsourced)
